Home / Compare / TWP 100 vs TWP 1500

TWP 100 vs TWP 1500: what’s the difference?

They’re both TWP and they go on the same way. The difference is VOC content, which decides where each one can be sold.

Updated October 2026 · Written by the DeckStainIQ team at The Stain Depot

The short answer

TWP 100 is the original TWP at 550 g/L VOC. It can't be sold in VOC-regulated states. TWP 1500 is TWP's lower-VOC version at 350 g/L, sold in all 50 states. You apply them the same way, and they can go over each other.

If you live in a regulated area, buy TWP 1500. Everywhere else, either one works.

Side by side

TWP 100 SeriesTWP 1500 Series
VOC550 g/L350 g/L
Where it can shipNot in the restricted areas listed belowAll 50 states
TypeOil-based, penetrating stain and wood preservative. No surface film.
Coats1 or 2, wet on wet2 wet on wet on most wood, 1 on hardwoods
Dry timeAbout 24 hoursAbout 48 hours in good conditions
ColorsClear, Cedartone, Redwood, Dark Oak, Honeytone, Rustic, Pecan, Prairie Gray, Cape Cod GrayClear, Cedartone, Redwood, Dark Oak, Black Walnut, California Red, Honeytone, Rustic, Pecan, Natural
Sizes1 gallon, 2, 3 and 4 gallon packs, 5 gallon pail1 gallon, 2, 3 and 4 gallon packs, 5 gallon pail

Where TWP 100 can't be shipped

California, Colorado, Connecticut, Delaware, District of Columbia, Illinois, Indiana, Maine, Maryland, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Utah, Vermont, Northern Virginia and Maricopa County, Arizona.

In those areas, order TWP 1500. Not sure about your area? Use our VOC State Checker.

Matching your color

Most popular colors carry the same name in both lines, with a different number: 101 Cedartone becomes 1501 Cedartone, 102 Redwood becomes 1502 Redwood, and 103 Dark Oak becomes 1503 Dark Oak. The two grays (Prairie Gray and Cape Cod Gray) are only in TWP 100. Wood takes color differently, so try a small test spot first.

Switching from TWP 100 to 1500

Because they're the same type of stain, TWP 1500 goes right over TWP 100 (and the other way around). Clean and brighten the deck, let it dry for two days, and apply as usual. No stripping needed.

Common questions

Is TWP 1500 as good as TWP 100?

They are made to be used the same way and protect the same way. The main differences are VOC content, which states they can ship to, a slightly longer dry time for TWP 1500 and a few different color options.

Can I put TWP 1500 over TWP 100?

Yes. They can go over each other. Clean and brighten the wood first and let it dry.

Why can’t I buy TWP 100 in my state?

Some states and air districts limit VOCs in stain. TWP 100 is 550 g/L, above those limits, so it can’t be sold there. TWP 1500 at 350 g/L is sold in all 50 states.

Not sure which is right for your deck?

Our Stain Finder asks five quick questions and gives you a top pick and a runner-up that can ship to your state.

Try the Stain FinderHow many gallons?

DeckStainIQ is run by the team at The Stain Depot, which sells the products mentioned here. We explain why we recommend each one.