Updated October 2026 · Written by the DeckStainIQ team at The Stain Depot
The short answer
Pick TWP if you want a penetrating stain that never peels and recoats easily, especially on rough or weathered pressure treated wood and cedar.
Pick Sikkens Cetol SRD if you want a one-coat, matte finish with Sikkens' color range for decks, siding and fences.
Pick Sikkens Cetol DEK only if you want a satin, hardwood-floor look and you're fine with the extra prep a film finish needs later.
Side by side
| TWP 100 / 1500 | Sikkens Cetol SRD / SRD RE | Sikkens Cetol DEK | |
|---|---|---|---|
| How it works | Penetrates the wood, no surface film | Oil-based, transparent matte | Builds a thin transparent satin film |
| Coats | 1 or 2, applied wet on wet | 1 | 2 |
| Dry time | About 24 hours (TWP 100), about 48 hours (TWP 1500) | 12 hours to touch, 48 hours before light foot traffic | 12 hours to touch, 24 hours before the 2nd coat |
| Coverage per gallon | 150–200 sq ft first coat, 200–300 second (TWP 100) | 150–200 sq ft rough wood, 250–400 smooth | 350–450 sq ft on smooth wood and hardwoods |
| Colors | 9 in TWP 100, 10 in TWP 1500 | 9 wood tones | 4 |
| VOC-regulated states | Use TWP 1500 (sold in all 50 states) | SRD RE is shipped automatically | Under 350 g/L |
| Recoating | Goes right over old TWP, no stripping | A fresh coat over clean, sound SRD | Film finishes need more prep once they wear |
Figures come from each product's label and data sheet. Check the can for your exact product.
Where TWP wins
TWP soaks into the wood instead of sitting on top, so there is nothing to crack, peel or blister. When the color starts to fade, usually in 12 to 24 months depending on the color and sun, you clean the deck and put a fresh coat right over the old TWP. No sanding, no stripping.
That makes TWP a strong fit for rough or weathered pressure treated decks, cedar, fences and anything you'd rather maintain often and easily than strip later. In VOC-regulated states, TWP 1500 is the version to buy. It goes on the same way as TWP 100.
Where Sikkens wins
Sikkens Cetol SRD (now sold as PPG ProLuxe SRD) is a one-coat stain, which saves a lot of time on big decks and houses. It has a refined, even matte look, and Sikkens uses the same color numbers across its line, so a deck in SRD can match siding in Sikkens Log & Siding.
If you want sheen, Cetol DEK builds a satin, furniture-like finish in two coats. Like any film finish, it needs more prep when it eventually wears than a penetrating stain does.
Prep matters more than the brand

Either stain will fail early on a dirty, gray or wet deck. Clean and brighten the wood first, for example with the TWP Restore-A-Deck kit, and let it dry at least two days. Most penetrating stains only go over themselves, so if your deck has a different brand on it now, strip it before switching.
Common questions
Is TWP better than Sikkens?
Neither is better for every deck. TWP is a penetrating stain that never peels and recoats easily. Sikkens Cetol SRD is a one-coat matte stain with a refined look. Choose based on the finish you want and how you plan to maintain it.
Can I put TWP over Sikkens, or Sikkens over TWP?
Not directly. Most penetrating stains only go over themselves. Strip the old stain, brighten the wood and let it dry before switching brands.
Which lasts longer, TWP or Sikkens?
It depends on sun, foot traffic and color. TWP typically needs a maintenance coat every 12 to 24 months, and darker tinted colors last longer than light or clear ones on any brand.
Can I buy TWP 100 or Sikkens SRD in a VOC-regulated state?
Not those versions. Use TWP 1500 instead of TWP 100, and Sikkens SRD RE instead of the original SRD. The Stain Depot ships the right Sikkens version to your state automatically.
Not sure which is right for your deck?
Our Stain Finder asks five quick questions and gives you a top pick and a runner-up that can ship to your state.
DeckStainIQ is run by the team at The Stain Depot, which sells the products mentioned here. We explain why we recommend each one.