Home / How-to / Cleaner vs brightener vs stripper

Deck cleaner vs brightener vs stripper

Cleaner removes dirt and gray. Stripper removes old finish. Brightener always comes last. Here’s how to tell what your deck needs.

Updated October 2026 · Written by the DeckStainIQ team at The Stain Depot

The short answer

Your deckWhat you needExample
Bare, gray or dirty wood, or a worn see-through stainCleaner, then brightenerTWP Restore-A-Deck kit, Woodrich Cleaner & Brightener kit
Solid stain, paint, a water-based finish, or anything peelingStripper, then brightenerWoodrich HD-80 & Brightener kit
Ipe or other hardwoodHardwood cleaner and brightenerDeckWise Cleaner & Brightener kit
Recoating PenofinPenofin's own prep kitPenofin Cleaner & Brightener kit
Gray deck with green growth before cleaning
Before: gray, green and dirty.
The same deck after cleaning and brightening, bright golden wood
After cleaning and brightening, same deck. A Supreme Deck Restoration job in Orion Township, MI.

Deck cleaner

Cleaner removes dirt, mildew, algae and the gray, sun-damaged layer of wood. Some cleaners, like Woodrich EFC-38 and the TWP Restore-A-Deck cleaner, also take off worn semi-transparent stain, which is often all you need before recoating.

Deck stripper

Stripper is stronger. It breaks down film finishes so they can be rinsed away: solid stains, paint-like coatings, water-based finishes and anything that's peeling. Woodrich HD-80 is sprayed on and left about 15 minutes per coat of finish you're removing. It's high pH, so cover plants, and it can darken some woods until you brighten.

You also need to strip when switching brands. Most penetrating stains only go over themselves.

Brightener

Brightener is the step people skip and shouldn't. Cleaners and strippers are alkaline and leave the wood dark and raised. A brightener such as Woodrich Citralic neutralizes that, brings back a fresh-cut color, removes tannin stains on cedar and redwood, and opens the wood so stain soaks in evenly.

Pressure washing

A pressure washer helps rinse, but keep it on a low setting with a wide tip and stay a foot or more away. Too much pressure gouges soft wood and raises fuzzy fibers that soak up stain unevenly.

Common questions

Do I need a brightener after a deck cleaner?

Yes. Brightener neutralizes the cleaner, restores the wood’s color and helps stain soak in evenly.

When do I need a deck stripper instead of a cleaner?

When there’s a solid stain, paint, a water-based or film finish, anything peeling, or a different brand of stain you’re switching away from.

Can I just pressure wash my deck before staining?

Pressure washing alone doesn’t remove mildew, old stain or gray fibers well, and high pressure can damage the wood. Use a cleaner and brightener, and rinse on a low setting.

Not sure which is right for your deck?

Our Stain Finder asks five quick questions and gives you a top pick and a runner-up that can ship to your state.

Try the Stain FinderHow many gallons?

DeckStainIQ is run by the team at The Stain Depot, which sells the products mentioned here. We explain why we recommend each one.