Updated October 2026 · Written by the DeckStainIQ team at The Stain Depot
Signs it's time
- Water soaks in instead of beading up when you splash some on the boards.
- The color has faded, especially in the sunniest spots and the main walking paths.
- Gray wood is showing through on the floor boards or rail tops.
- Mildew or dark spots keep coming back after you rinse.
Recoat at the first signs. A quick clean and one fresh coat is far less work than stripping a deck that's been let go.

What changes the timing
| Factor | Lasts longer | Wears faster |
|---|---|---|
| Stain color | Darker, tinted colors | Clear and very light colors |
| Sun | Shade, north-facing | Full afternoon sun |
| Surface | Vertical: rails, siding, fences | Horizontal: floor boards, steps, rail tops |
| Traffic | Light use | Main paths, grill areas, pets |
| Prep | Cleaned, brightened, fully dry wood | Stain over dirt, gray fibers or damp wood |
Typical ranges by product
- TWP: plan on a maintenance coat when the color starts to fade, usually in 12 to 24 months depending on the color.
- Hardwood oils on ipe: often yearly on decks in full sun if you want to keep the rich color.
- Vertical surfaces like siding and fences usually go noticeably longer than the deck floor with the same product.
The easy maintenance routine
- Rinse and sweep the deck each spring and fall.
- When it's time, clean and brighten (the TWP Restore-A-Deck kit handles both).
- Let it dry two days and apply one fresh coat of the same stain. Penetrating stains like TWP go right over themselves, with no stripping.
Common questions
How often should I restain my deck?
It depends on the stain, color, sun and traffic. Recoat when water stops beading and the color fades. TWP typically needs a maintenance coat every 12 to 24 months.
Do I have to strip my deck every time I restain?
Not with a penetrating stain. Clean, brighten and apply a fresh coat of the same product. Strip only for film finishes, peeling, or when switching brands.
Why does my deck floor fade faster than the railings?
Floor boards get direct sun, standing water and foot traffic. Vertical surfaces shed water and get less wear, so they last longer.
Not sure which is right for your deck?
Our Stain Finder asks five quick questions and gives you a top pick and a runner-up that can ship to your state.
DeckStainIQ is run by the team at The Stain Depot, which sells the products mentioned here. We explain why we recommend each one.