Updated October 2026 ยท Written by the DeckStainIQ team at The Stain Depot
What are the spots?
| What you see | Likely cause | Fix |
|---|---|---|
| Black or green speckles, worst in shady, damp areas | Mildew or mold | Wood cleaner, scrub, rinse |
| Dark streaks or blotches on cedar or redwood, often after washing | Tannin bleed | Wood brightener |
| Blue-black stains around nails, screws or where metal sat | Iron stains | Oxalic acid brightener |
| Black spots under the stain that won't wash off | Mildew trapped under the old finish | Strip or deep clean, then restain |
A quick test: put a few drops of household bleach on a spot (somewhere hidden). If it lightens within a minute or two, it's mildew. If not, it's more likely tannin or iron.

Cleaning mildew
- Wet the deck and apply a wood cleaner made for decks, such as the cleaner in the TWP Restore-A-Deck kit, Outlast KleenStart or the Expert Stain & Seal cleaner kit.
- Let it work for the time on the label without letting it dry, then scrub with a stiff brush.
- Rinse well. A pressure washer on a low setting with a wide fan tip helps; too much pressure gouges the wood.
- Follow with a brightener to neutralize the cleaner and restore the wood's color.
Skip straight chlorine bleach on its own. It can whiten the surface without cleaning out the wood, and it's hard on wood fibers and plants.
Spots under the old stain
If the mildew is sealed under an old finish, cleaning the surface won't reach it. A stronger cleaner or mild stripper like Woodrich EFC-38 takes off worn stain along with the growth underneath. Then brighten, dry and restain.
Tannin and iron stains
Both come out with an oxalic acid brightener such as Expert Stain & Seal Wood Brightener. For iron stains, also replace rusting fasteners with stainless or coated ones, or the stains will come back.
Keeping it from coming back
- Sweep off leaves, pine needles and dirt. They hold moisture and feed mildew.
- Trim plants back from the deck and let air move underneath it.
- Move planters and mats now and then so the wood under them can dry.
- Keep the deck stained. Stains like TWP and Ready Seal help the wood shed water, and wood that stays dry grows less mildew.
- Rinse and scrub shady areas each spring before growth builds up.
Common questions
How do I get black spots off my deck?
First find out what they are. Mildew comes off with a deck cleaner and scrubbing. Tannin and iron stains need an oxalic acid brightener.
Can I stain over mildew?
No. Stain traps mildew underneath and it keeps growing. Clean, brighten and let the deck dry before staining.
Why does mildew keep coming back on my deck?
Shade, trapped moisture and debris. Keep the deck clean, improve airflow, and keep it stained so the wood dries faster.
Not sure which is right for your deck?
Our Stain Finder asks five quick questions and gives you a top pick and a runner-up that can ship to your state.
DeckStainIQ is run by the team at The Stain Depot, which sells the products mentioned here. We explain why we recommend each one.