Home / Wood / Pressure treated

Best stain for a pressure treated deck

Pressure treated pine takes a penetrating, oil-based stain best. Timing and prep matter as much as the brand.

Updated October 2026 · Written by the DeckStainIQ team at The Stain Depot

Our picks

StainWhy we like it on pressure treatedShips to VOC-regulated states?
TWP 100 / TWP 1500Penetrating stain and wood preservative, no film to peel, recoats right over itselfTWP 1500 yes, TWP 100 no
Ready SealForgiving to apply, no back-brushing, good for first-timersYes, except Southern California's South Coast AQMD
Penofin Pressure TreatedMade specifically for pressure treated lumber, natural wood tonesYes, except South Coast AQMD
Sikkens Cetol SRD / SRD REOne-coat matte finish with Sikkens colorsYes (SRD RE ships automatically)
Expert Stain & Seal Semi-SolidMore color to hide wear on older, uneven boardsYes

Our default for a typical pressure treated deck is TWP: TWP 100 where it's allowed and TWP 1500 everywhere else.

How long to wait on new pressure treated wood

New pressure treated deck with black metal balusters, not yet stained
A new pressure treated deck, built and waiting to dry out before staining. A Supreme Deck Restoration job in Chelsea, MI.

New pressure treated lumber is wet from the treatment process, and stain can't soak into wet wood. TWP recommends letting new pressure treated lumber weather for about 12 months before staining.

Not sure if yours is ready? Sprinkle some water on the boards. If it soaks in within a few minutes, the wood is ready. If it beads up, give it more time.

Prep: the step that decides how long the stain lasts

  1. Clean off dirt, mildew and gray, weathered fibers with a deck cleaner.
  2. Brighten to neutralize the cleaner and open the wood. The TWP Restore-A-Deck kit does both steps.
  3. Let it dry at least two days before staining.
  4. Strip first if there's a different brand of stain, a solid stain or paint on the deck. Penetrating stains can't soak through it.

Applying it

Stain in the shade or on a cloudy day between 50°F and 85°F, with no rain expected for two days. Work a few boards at a time, end to end, so you don't get lap marks. With TWP, apply a second coat wet on wet if the first soaks in within 15 to 30 minutes.

Carpenter bees around your deck? Mix Bee Gone into the stain before you apply it.

Common questions

What is the best stain for pressure treated wood?

A penetrating, oil-based stain such as TWP (TWP 1500 in VOC-regulated states), Ready Seal or Penofin Pressure Treated. They soak in rather than forming a film, so they don’t peel.

How long should I wait to stain a new pressure treated deck?

TWP recommends about 12 months for new pressure treated lumber. Test with water: if it soaks in, the wood is ready.

Do I need to clean a new pressure treated deck before staining?

Yes. Cleaning and brightening removes mill glaze, dirt and mildew so the stain can soak in evenly.

Should I use a solid stain on pressure treated wood?

Only if the boards are worn or uneven and you want to hide that. Semi-transparent penetrating stains are easier to maintain because they don’t peel.

Not sure which is right for your deck?

Our Stain Finder asks five quick questions and gives you a top pick and a runner-up that can ship to your state.

Try the Stain FinderHow many gallons?

DeckStainIQ is run by the team at The Stain Depot, which sells the products mentioned here. We explain why we recommend each one.